Gaurds removed for clarity

TRYAX 2SVG Manual Mill


  • 3HP Spindle Motor, R8 Spindle Taper
  • 4,200 rpm spindle speed with HI-LO gear 
  • Hardened & Ground with turcite-B coating guide way
  • Double nut precision acme lead screws for high accuracy and long lasting
  • FC30 Meehanite  Casting main frame with annealed & stress relieved for long term reliability
  • Anti rust chrome quill
  • Standard way cover on three axes
  • Tool box & Tools
  • Precision APEC class7 spindle bearing to ensure spindle runout within 0.0002
  • One shot lubrication system
  • Built-in Quartz work light

Sino 2axes digital read out system

£5,800 plus VAT


Table:       9” x 49”
Longitudinal travel (X axis ):     36”
Cross travel:    12”
Z axis travel quill:   5”
Knee travel (manual):                                 16”
Quill diameter:                                     3.375” (86 mm)
Spindle nose to table top (D):  0.75”-16.75” (20 - 426mm)
Load capacity:   600 lb
Spindle taper:   R8
Spindle Speed (r. p.m.):   70 to 4200 rpm with Hi/Lo gear
Transmission of spindle & motor:      Timing Belt   
Spindle center to column front surface:6.875” to 27.875” (175 - 707mm)
Swivel (left/right) : 90 degree
Tile (front/back):   45 degree
Spindle motor/max torque:    3HP (Std.) 
 KVA rating:        4KVA, 15amps
Coolant pump (optional) 1/8 Hp
Lubrication pump:   one shot
Power requirement:  4 KVA, 3 Phase 220 or 440 voltage
Length X Width X Height (LXWXH):  101” x 70” x 82”

Net Weight:    

2,200 lbs

Power requirement  4 KVA 3 phase 220V or 440 V
Air requirement With opt. power draw bar 90 - 100 psi
Type of oil for Way oil /  pneumatic oil Mobil Vactra #2 / Air tool oil
Coolant capacity 7 Gallons
Tools & box Align power feedSino 2axes digital read out system
Operation manualR8 collect holder   Halogen work light
 Draw bar  One shot lube system  
Way cover